Hacking the Yarvik / Sweex TAB250
Hardware
The Yarvik / Sweex TAB250 is built using the following ICs:
- TCC8902
- Telechips 8902 SoC CPU / GPU / etc.
- 2x Samsung K4T1G164QF-BCE7
- 1Gbit DDR2 memory
- Hynix H27UBG8T2ATR
- 4GB NAND flash memory
- Realtek ALC5621
- Audio codec IC
- Focaltech FT5406EE8
- Touchpad controller
- AXP192
- Enhanced single Cell Li-Battery and Power System Management IC
- Realtek RTL8188CUS
- IEEE 802.11b/g/n 1T1R WLAN Controller with USB2.0 Interface
Connecting the TAB250 to your PC
To be able to log in to the TAB250 as root, you need to connect the tablet to a Windows computer, with the Android platform tools installed (ADB) and the USB drivers for the Telechips TCC8902. The USB drivers can be found by Googling for usb_inf_X5A.zip.
After starting
adb shell, a shell is opened on the tablet, running as user root.
Starting a shell using Terminal Emulator (or another app) will not run as root, but as a user with limited privileges.
PLEASE NOTE: This procdure may brick or otherwise damage your tablet and make it unusable (but a nice coaster).
To be able to recover your device after flashing a new ROM, you should first install a different recovery image. The recovery image can be used to create a backup or restore a working ROM, or copy files to / from your computer.
First, create a backup of the original recovery image, by downloading
http://files.androtab.info/telechips/dump-recovery/dump-recovery-signed.zip, rename it to update.zip and copying it to your sd-card. Reboot into the standard recovery image, by holding Volume-+ and the power button for a number of seconds. Pressing the Home button should then show the recovery options. Install update.zip via the menu options. This should create 2 files on the sd-card: dumped_recovery.img and dumped_proc_mtd.txt.
Download the
ClockworkMod Recovery 5 for the Storage Options Scroll 7" capacitive device from
http://androtab.info/telechips/cyanogenmod/, rename it to update.zip and install using the recovery menu.
See
http://androtab.info/telechips/cyanogenmod/ for more information.
Creating a backup using ClockworkMod Recovery 5
Boot into the recovery image and create a backup of the default ROM, using the menu options. Copy all backup-files on the sd-card to a safe place.
--
Ivo van Geel - 03 Nov 2011